series 16
Product Specifications
printing ink | print | Print below | Flexo printing | Roto printing | heat resistance | film |
Series 16 | ✅ | ✅ | ✅ | ✅ | 160< | BOPP |
General product specifications
High colour strength
High Glass
High dry rub resistan
High heat resistance
standard initial subs
Good in transfer
Easy on packing set
High using varnish
Less dotgain
halftone and fulltone printing
High Adhesion property
600 Lpc
High Solubility
High Solubility
Technical specifications of the product
Initial viscosity:
Color ink: 30-35 seconds with DIN4 cup at 20 degrees
White ink: 40-50 seconds with DIN4 cup at 20 degrees
Viscosity when printing:
Flexo printing: 18-20 seconds with a DIN4 cup at a temperature of 25 degrees
Roto printing: 14-16 seconds with DIN4 cup at 25 degrees
Percentage of dry ingredients: 30% to 50%
Preparation conditions before printing:
Flexo system:
Diluent: 80% isopropyl alcohol, 20% ethyl acetate
Retarder: Methoxypropanol
Accelerator: ethyl acetate
packing :
Color compounds: in 20 kilo gallons
White inks: in 30 kilo gallons
Storage and maintenance:
It can be stored in sealed gallons for six months at a temperature of 5 to 30 degrees Celsius.
Gold and silver inks can be stored in sealed gallons for three months at a temperature of 5 to 30 degrees Celsius.
special services
In the special service department, Hor Flex is ready to produce all kinds of mixed colors according to the customer’s request due to being equipped with the Spectro Eye device. Hor Flex compounding is ready to provide after-sales services and expert services to its customers. For more information, contact Hor Flex expert and consulting group.